i can't upload my image from firealpaca

bloodclanrises

i looked up another discussion topic about this, but the answers i found there didn't help, i use a mac, so i'm not sure if that's the problem or something else.

Austinato

I believe you have to upload your image to one of the supported image hosts found here on the Scratch Wiki, and then upload it to Scratch just like you would from FireAlpaca.

7500+ posts (19th)

bloodclanrises

thanks, i'll see if that works

asivi

Export(Save as) such image as a compatible Scratch file format. JPG JPEG BMP PNG GIF

TimeLordPlanet

Everyone around here uses cubeupload

I like Scratch 3.0! An immesurable improvment! Banner coming soon!

Austinato

bloodclanrises wrote:
thanks, i'll see if that works

Alright, does it work? I suggest using CubeUpload, as that does not require logging in, and neither does it contain much advertisements. You do have to create an account to delete images.

7500+ posts (19th)

bloodclanrises

Not doesn't work

Last edited by bloodclanrises (March 29, 2017 19:15:23)

bloodclanrises

bloodclanrises wrote:
Not doesn't work

actually i tried it with my other art program and that works

bloodclanrises

Austinato wrote:
bloodclanrises wrote:
thanks, i'll see if that works
Alright, does it work? I suggest using CubeUpload, as that does not require logging in, and neither does it contain much advertisements. You do have to create an account to delete images.

how do i upload it to scratch after that?

_nix

Press “File -> Save As” and change the file type to a PNG file instead of an MDP:

MDP files are the type of file that FireAlpaca uses; they store image data, but not in the same way as a PNG, which is the type of file that Scratch uses.

Then you can import the image from your computer into the Scratch editor the way you would usually import an image:

══ trans autistic lesbian enbydoggirls // 16 17 18 19 20 21, she/they ════
sparrows one word to the paragraph // <3 // ~(quasar) nebula

bloodclanrises

_nix wrote:
Press “File -> Save As” and change the file type to a PNG file instead of an MDP:

MDP files are the type of file that FireAlpaca uses; they store image data, but not in the same way as a PNG, which is the type of file that Scratch uses.

Then you can import the image from your computer into the Scratch editor the way you would usually import an image:

i've tried doing that, it didn't work, it won't open up, i can try again, but i'm pretty sure it won't work. thanks anyway.

Austinato

bloodclanrises wrote:
Austinato wrote:
bloodclanrises wrote:
thanks, i'll see if that works
Alright, does it work? I suggest using CubeUpload, as that does not require logging in, and neither does it contain much advertisements. You do have to create an account to delete images.
how do i upload it to scratch after that?

Using the [img] and [/img] tags with the link provided by the supported image host in between them.

7500+ posts (19th)

bloodclanrises

Austinato wrote:
bloodclanrises wrote:
Austinato wrote:
bloodclanrises wrote:
thanks, i'll see if that works
Alright, does it work? I suggest using CubeUpload, as that does not require logging in, and neither does it contain much advertisements. You do have to create an account to delete images.
how do i upload it to scratch after that?
Using the [img] and [/img] tags with the link provided by the supported image host in between them.

i'm not sure i understand you?

WolfCat67

bloodclanrises wrote:
i'm not sure i understand you?

I'm here to help.
Basically, what Austinato is saying is that your image will show up like this in the text:

[img]IMAGE LINK[/img]

Your goal is to get the image link from a supported site such as CubeUpload. Here's a step-by-step of CubeUpload.

1. Go to “cubeupload.com”, and this should appear.

2. Click “Select Images”. Then, put down any image.

3. Click “Start Upload”, and a link will appear.

4. Copy and paste the top link, and put it between the following tags:
[img]Example Link[/img]
Then, you're done!

Yes, I screenshotted pictures of CubeUpload, and then put them on CubeUpload.

Last edited by WolfCat67 (March 30, 2017 02:53:56)

SolarWind12

TimeLordPlanet wrote:
Everyone around here uses cubeupload

Even the Scratch Team use cubeupload! It really is an awesome site!

Hi, and Welcome to my signature! It doesn't change that often, but, hey, might be intresting to read; you never know (or at least not until you read it.) If you've got this far, it's pretty obvious that you're reading this to see just how intresting it is. Yes, you're reading this to see if there's a bonus bit at the end. You have to satisfy your natural curiosity and see how it turns out. Well, I dare you to stop…
You couldn't do it, could you? Sorry, you lost! Bye now!

Fact
An Evil Kumquat was eaten by my forum signature

bloodclanrises

WolfCat67 wrote:
bloodclanrises wrote:
i'm not sure i understand you?
I'm here to help.
Basically, what Austinato is saying is that your image will show up like this in the text:
[img]IMAGE LINK[/img]
Your goal is to get the image link from a supported site such as CubeUpload. Here's a step-by-step of CubeUpload.
1. Go to “cubeupload.com”, and this should appear.

2. Click “Select Images”. Then, put down any image.

3. Click “Start Upload”, and a link will appear.

4. Copy and paste the top link, and put it between the following tags:
[img]Example Link[/img]
Then, you're done!
Yes, I screenshotted pictures of CubeUpload, and then put them on CubeUpload.

oh, that makes more sense, but where do i put it?

Austinato

bloodclanrises wrote:
oh, that makes more sense, but where do i put it?

Could you be more specific on what you're talking about?

7500+ posts (19th)

bloodclanrises

Austinato wrote:
bloodclanrises wrote:
oh, that makes more sense, but where do i put it?
Could you be more specific on what you're talking about?

like where do i put the link in scratch

WolfCat67

bloodclanrises wrote:
Austinato wrote:
bloodclanrises wrote:
oh, that makes more sense, but where do i put it?
Could you be more specific on what you're talking about?
like where do i put the link in scratch

I mentioned that you put it in between these tags:

[img] Put Link Here [/img]

Basically, you'll type that out, and post your link in between the two. Then, it should show up with an image upon posting. You can click the green checkmark while writing out a post to preview it to make sure that the image appears correctly.

TimeLordPlanet

bloodclanrises wrote:
WolfCat67 wrote:
bloodclanrises wrote:
i'm not sure i understand you?
I'm here to help.
Basically, what Austinato is saying is that your image will show up like this in the text:
[img]IMAGE LINK[/img]
Your goal is to get the image link from a supported site such as CubeUpload. Here's a step-by-step of CubeUpload.
1. Go to “cubeupload.com”, and this should appear.

2. Click “Select Images”. Then, put down any image.

3. Click “Start Upload”, and a link will appear.

4. Copy and paste the top link, and put it between the following tags:
[img]Example Link[/img]
Then, you're done!
Yes, I screenshotted pictures of CubeUpload, and then put them on CubeUpload.
oh, that makes more sense, but where do i put it?

In the discussion forums, hit Cmd+P, then past the url. Some bbcode should then insert, looking like:

 [img]i.cubeupload.com/Abc123[/img]

Last edited by TimeLordPlanet (March 31, 2017 13:37:10)

I like Scratch 3.0! An immesurable improvment! Banner coming soon!

Discuss Scratch