☛ Rollercoasterfan's Ultimate Intro Shop ⓇⒸⒻ'Ⓢ ⓊⒾⓈ ☚

rollercoasterfan

This is my second shop after this one, which had pretty much everything. I'm back with a new shop, but this time, I'm just doing intros. Fill out the following form(s) to get an intro:

If Using An Existing Logo:

What you want:
Time (how long will the intro last before finishing):
When it should be done (give me two days at most)
Other:

If Making A New Logo:

What art you want
Colors (where?)
What you want for the intro:
Time (how long will the intro last before finishing):
When it should be done (give me three days at most)
Other:

That's it! Request away, I'm on everyday.
An example of one is my own intro, found on my newest games.

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

rollercoasterfan

~Reserved~

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

rollercoasterfan

~Reserved~

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

rollercoasterfan

~Reserved~

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

rollercoasterfan

~Reserved/Bump~

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

rollercoasterfan

~Reserved/Bump~

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

Pot-of-Cake

I don't need one, but I'm happy you are starting a new one

TheCrimulo

What you want: A intro for every project
Time (how long will the intro last before finishing): 6 seconds
When it should be done (give me two days at most): -2 weeks
Other: Logo: http://makepixelart.com/artists/anonymous/tcf_2
Explanation: Ghost effect to the logo in a white background, 6 seconds later, the image fells like sand.

Thanks

I used to roll the dices

Feel the fear on my enemies eyes.

rollercoasterfan

TheCrimulo wrote:
What you want: A intro for every project
Time (how long will the intro last before finishing): 6 seconds
When it should be done (give me two days at most): -2 weeks
Other: Logo: http://makepixelart.com/artists/anonymous/tcf_2
Explanation: Ghost effect to the logo in a white background, 6 seconds later, the image fells like sand.

Thanks

Is this good?
https://scratch.mit.edu/projects/67507430/

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

rollercoasterfan

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

rollercoasterfan

Bump.

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

Iloverollercoasters

What you want: Pieces of my logo spinning around in the air and then come together to make my logo, then my username (Iloverollercoasters) will come up from the bottom.
Time (how long will the intro last before finishing): 7 seconds.
When it should be done (give me two days at most) Anytime!
Other: None.

Sorry, my minds all over the place, I'll make my own intro.

Last edited by Iloverollercoasters (July 27, 2015 01:08:38)

Horrible House contest Join it now!
Have you clicked this or this or maybe even this? How about this or this? Maybe this? If you haven't don't has- Grr… Evil kumquats, why you got to eat it… Guess what! I hate the 60 second rule!
Kumquat alert Oh, here:

 when green flag clicked
forever
    eat @-EvilKumquat-
end[/url]






when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap
[scratchblocks]
When green flag clicked
trigger pen::pen

when pen is triggered::pen hat
pen up
go to x: (pick random (-240) to (240)) y: (pick random (-180) to (180)
pen down
repeat (pick random (15)to(10000)
render
end

define render
set pen tranceparency to (43)::pen
repeat (89)
move (17) steps and turn down (87) degrees::motion
end
repeat (98)
move (-34) steps and turn up (43.5) degrees::motion
end
go to x(pick random (-10) to (10)) y (pick random (-10) to (10)
if <((x position)=(0))and ((y position)=(0)
stamp
render
else
stop this script and stamp at size (3) and x(89) y(52)::pen cap
end

This is a script that goes on with the other scripts:::grey

When all scripts are done::hat
run the scripts again::events
[/scratchblocks]

makethebrainhappy

Iloverollercoasters wrote:
What you want: Pieces of my logo spinning around in the air and then come together to make my logo, then my username (Iloverollercoasters) will come up from the bottom.
Time (how long will the intro last before finishing): 7 seconds.
When it should be done (give me two days at most) Anytime!
Other: None.

Do you mind if I would do your order

?

Rate My Reply:

Scratch Helper! My Website:<— LetsMakeTheBrainHappy

rollercoasterfan

makethebrainhappy wrote:
Iloverollercoasters wrote:
What you want: Pieces of my logo spinning around in the air and then come together to make my logo, then my username (Iloverollercoasters) will come up from the bottom.
Time (how long will the intro last before finishing): 7 seconds.
When it should be done (give me two days at most) Anytime!
Other: None.

Do you mind if I would do your order ?

Nope, go ahead.

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

Iloverollercoasters

Bumping for @rollercoasterfan

Horrible House contest Join it now!
Have you clicked this or this or maybe even this? How about this or this? Maybe this? If you haven't don't has- Grr… Evil kumquats, why you got to eat it… Guess what! I hate the 60 second rule!
Kumquat alert Oh, here:

 when green flag clicked
forever
    eat @-EvilKumquat-
end[/url]






when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap
[scratchblocks]
When green flag clicked
trigger pen::pen

when pen is triggered::pen hat
pen up
go to x: (pick random (-240) to (240)) y: (pick random (-180) to (180)
pen down
repeat (pick random (15)to(10000)
render
end

define render
set pen tranceparency to (43)::pen
repeat (89)
move (17) steps and turn down (87) degrees::motion
end
repeat (98)
move (-34) steps and turn up (43.5) degrees::motion
end
go to x(pick random (-10) to (10)) y (pick random (-10) to (10)
if <((x position)=(0))and ((y position)=(0)
stamp
render
else
stop this script and stamp at size (3) and x(89) y(52)::pen cap
end

This is a script that goes on with the other scripts:::grey

When all scripts are done::hat
run the scripts again::events
[/scratchblocks]

makethebrainhappy

Rate My Reply:

Scratch Helper! My Website:<— LetsMakeTheBrainHappy

rollercoasterfan

Any orders? I'm bored, and so I just did an intro for Haudio, when I was only supposed to do a logo…

Link here, if anyone wants to see it: https://scratch.mit.edu/projects/70407362/

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

Cream_E_Cookie

rollercoasterfan wrote:
Any orders? I'm bored, and so I just did an intro for Haudio, when I was only supposed to do a logo…

Link here, if anyone wants to see it: https://scratch.mit.edu/projects/70407362/

I don't really need one, but you can make me one, and I will probably use it.
I would like one like haudios, using my logo, and for the user name, it will simply say Cream_E_Cookie. I want the text to be blue

rollercoasterfan

Cream_E_Cookie wrote:
rollercoasterfan wrote:
Any orders? I'm bored, and so I just did an intro for Haudio, when I was only supposed to do a logo…

Link here, if anyone wants to see it: https://scratch.mit.edu/projects/70407362/
I don't really need one, but you can make me one, and I will probably use it.
I would like one like haudios, using my logo, and for the user name, it will simply say Cream_E_Cookie. I want the text to be blue

Okay! I'll start!

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

rollercoasterfan

rollercoasterfan wrote:
Cream_E_Cookie wrote:
rollercoasterfan wrote:
Any orders? I'm bored, and so I just did an intro for Haudio, when I was only supposed to do a logo…

Link here, if anyone wants to see it: https://scratch.mit.edu/projects/70407362/
I don't really need one, but you can make me one, and I will probably use it.
I would like one like haudios, using my logo, and for the user name, it will simply say Cream_E_Cookie. I want the text to be blue
Okay! I'll start!

Or not…
Sorry.

Bump.

when [chromometer altimeter v] = [5th length v] and [7th length v] with a [gap v] of (17) ::events hat
forge [chromometer v] altimeter until < (speed) = (velocity)> ::control cstart
	switch places with (759 v) altimeters with value of (speed) ::looks
	control [altimeter 1 v] at time (10):(17):(58) ::control
end
initialize sequence (24) so [object 3 v] moves to x (156) y (231) ::control
reveal [final answer v] and stop running this script ::events cap

Discuss Scratch