when GF clicked
set [x v] to [0]
set [y v] to [0]
repeat (y)
set [x v] to ((x) * (y))
end

Try that.

Poemon1_REMIX wrote:

when GF clicked
set [x v] to [0]
set [y v] to [0]
repeat (y)
set [x v] to ((x) * (y))
end

Try that.

Didn't work, but my new project does!

Scratch cat knows exponents

Poemon1_REMIX wrote:

when GF clicked
set [x v] to [0]
set [y v] to [0]
repeat (y)
set [x v] to ((x) * (y))
end

Try that.

Here it only works if y is a natural number. A block could do anything.

savaka wrote:

Poemon1_REMIX wrote:

when GF clicked
set [x v] to [0]
set [y v] to [0]
repeat (y)
set [x v] to ((x) * (y))
end

Try that.

Here it only works if y is a natural number. A block could do anything.

If (y)<(0) then
repeat (y)
set [x v] to ((x) * (y))
_
set [x v] to ((1) / (x))

Boom. It now works for negatives. And you can use (mod (1)) then the log method for non-integers.

I understand all these work, but wouldn't a block be way easier for new Scratchers? I have no idea what logarithms are.

savaka wrote:

I understand all these work, but wouldn't a block be way easier for new Scratchers? I have no idea what logarithms are.

A logarithm is like a reverse power. For example,

How many 5's are in 15?
5 ^ 3 = 15,
LOG(5)15 = 3.

Here's the format:
LOGS:
LOG(base)answer = power

POWERS:
base ^ power = answer.

just switch around power and answer.

Poemon1_REMIX wrote:

savaka wrote:

I understand all these work, but wouldn't a block be way easier for new Scratchers? I have no idea what logarithms are.

A logarithm is like a reverse power. For example,

How many 5's are in 15?
5 ^ 3 = 15,
LOG(5)15 = 3.

Here's the format:
LOGS:
LOG(base)answer = power

POWERS:
base ^ power = answer.

just switch around power and answer.

Log seems to take 2 parameters. Scratch's advanced math block only takes 1!

savaka wrote:

Log seems to take 2 parameters. Scratch's advanced math block only takes 1!

Logarithm of a number (say a) for a particular base (say b) is usually written as logb a - where the small b is the closest I could write to a subscript using BBCode.

But there are certain bases for which the notation is normally simplified. One of these is base 10, in which case the subscript b is usually dropped (unless there's a reason to show it explicitly, to avoid confusion, or to make it really clear what is meant). So the “log” in Scratch's drop-down means base 10 logarithm.

The other is the so called "natural logarithm", which is logarithm to base e (=2.718281828459045…)
In that case it is written as “ln” (lower case L and N). This is also in the Scratch maths drop-down.

You can think of “log” as being the ‘opposite’ of “10 to the power” - so that log(10^n)=n.
Similarly, you can think of “ln” as being the ‘opposite’ of "e to the power" - hence ln(e^n)=n.

That's why the two methods for x^y that I outlined earlier using those blocks are identical:

([10^ v] of ((y) * ([log v] of (x))) // =  x^y
([e^ v] of ((y) * ([ln v] of (x))) // =  x^y

Hope that make sense!

DadOfMrLog wrote:

savaka wrote:

Log seems to take 2 parameters. Scratch's advanced math block only takes 1!

Logarithm of a number (say a) for a particular base (say b) is usually written as logb a - where the small b is the closest I could write to a subscript using BBCode.

But there are certain bases for which the notation is normally simplified. One of these is base 10, in which case the subscript b is usually dropped (unless there's a reason to show it explicitly, to avoid confusion, or to make it really clear what is meant). So the “log” in Scratch's drop-down means base 10 logarithm.

The other is the so called "natural logarithm", which is logarithm to base e (=2.718281828459045…)
In that case it is written as “ln” (lower case L and N). This is also in the Scratch maths drop-down.

You can think of “log” as being the ‘opposite’ of “10 to the power” - so that log(10^n)=n.
Similarly, you can think of “ln” as being the ‘opposite’ of "e to the power" - hence ln(e^n)=n.

That's why the two methods for x^y that I outlined earlier using those blocks are identical:

([10^ v] of ((y) * ([log v] of (x))) // =  x^y
([e^ v] of ((y) * ([ln v] of (x))) // =  x^y

Hope that make sense!

Ya, I was going to get on to that next. Also, LOG(x) is equivalent to LOG(x)^y, right?

power what do you mean power?

SuperNicky wrote:

power what do you mean power?

like 5^2 = 25, or 2^3 = 8.

(^ is power)

DadOfMrLog wrote:

savaka wrote:

Log seems to take 2 parameters. Scratch's advanced math block only takes 1!

Logarithm of a number (say a) for a particular base (say b) is usually written as logb a - where the small b is the closest I could write to a subscript using BBCode.

But there are certain bases for which the notation is normally simplified. One of these is base 10, in which case the subscript b is usually dropped (unless there's a reason to show it explicitly, to avoid confusion, or to make it really clear what is meant). So the “log” in Scratch's drop-down means base 10 logarithm.

The other is the so called "natural logarithm", which is logarithm to base e (=2.718281828459045…)
In that case it is written as “ln” (lower case L and N). This is also in the Scratch maths drop-down.

You can think of “log” as being the ‘opposite’ of “10 to the power” - so that log(10^n)=n.
Similarly, you can think of “ln” as being the ‘opposite’ of "e to the power" - hence ln(e^n)=n.

That's why the two methods for x^y that I outlined earlier using those blocks are identical:

([10^ v] of ((y) * ([log v] of (x))) // =  x^y
([e^ v] of ((y) * ([ln v] of (x))) // =  x^y

Hope that make sense!

Oh, I get it. You use multiplication.

savaka wrote:

DadOfMrLog wrote:

That's why the two methods for x^y that I outlined earlier using those blocks are identical:

([10^ v] of ((y) * ([log v] of (x))) // =  x^y
([e^ v] of ((y) * ([ln v] of (x))) // =  x^y

Hope that make sense!

Oh, I get it. You use multiplication.

Yes, if you know about how things multiply (and divide) within logs, you'll know the following identities:

log(x*y) = log(x) + log(y)
log(x/y) = log(x) - log(y)

Above is true for any base logarithm, but let's just stick with base 10 to avoid having lots of subscripts.

Now, if you take that first one and do something like log(x^4) = log(x*x*x*x), you see it's just log(x)+log(x)+log(x)+log(x), i.e. 4*log(x).

It's not hard to see the generalisation of that: log(x^y) = y*log(x).
That one is particularly important for us here, because it contains the x^y that we want to calculate.

We know that 10^ and log are ‘opposites’, which means that log(10^n) = n.
…and also: 10^(log n) = n.

If you put n = x^y into that, and use the identity above, guess what you find…

The thing is that you can't do negative numbers with logs.

firedrake969_test wrote:

The thing is that you can't do negative numbers with logs.

OK, so here's my definitive x^y custom block…

define result = (x) ^ (y)
if <(y) = [0]> then
  set [result v] to [1] // yes, we also include 0^0=1  :O
else
  if <(x) = [0]> then
    set [result v] to [0]  // 0^y=0 for any y except zero (see above)
  else
    set [result v] to ([e^ v] of ((y)*([ln v] of ([abs v] of (x)))) // no negative x for now
    if <(x) < [0]> then  // now deal with power of negative number
      if <(round(y)) = (y)> then // we can do integer powers of negative numbers
        if <((y) mod (2)) = [1]> then
          set [result v] to ((0) - (result)) // odd powers will be negative
        end
      else
        set [result v] to [NaN] // but let's not go there at this stage...
      end
    end
    if <<(y) > [0]> and <<(round(x)) = (x)> and <(round(y)) = (y)>>> then
      set [result v] to (round (result)) // ensure we get exactly an integer if both x & y were ints
    end
  end
end

That should cover everything but non-integer powers of negative numbers (which gets a bit hairy…), and it makes sure that integer raised to integer gives exactly an integer (in case you assume you'll get an integer, perhaps because you check for equality with an integer at some point).

Hope I've got that all right!

DadOfMrLog wrote:

firedrake969_test wrote:

The thing is that you can't do negative numbers with logs.

OK, so here's my definitive x^y custom block…

define result = (x) ^ (y)
if <(y) = [0]> then
  set [result v] to [1] // yes, we also include 0^0=1  :O
else
  if <(x) = [0]> then
    set [result v] to [0]  // 0^y=0 for any y except zero (see above)
  else
    set [result v] to ([e^ v] of ((y)*([ln v] of ([abs v] of (x)))) // no negative x for now
    if <(x) < [0]> then  // now deal with power of negative number
      if <(round(y)) = (y)> then // we can do integer powers of negative numbers
        if <((y) mod (2)) = [1]> then
          set [result v] to ((0) - (result)) // odd powers will be negative
        end
      else
        set [result v] to [NaN] // but let's not go there at this stage...
      end
    end
    if <<(y) > [0]> and <<(round(x)) = (x)> and <(round(y)) = (y)>>> then
      set [result v] to (round (result)) // ensure we get exactly an integer if both x & y were ints
    end
  end
end

That should cover everything but non-integer powers of negative numbers (which gets a bit hairy…), and it makes sure that integer raised to integer gives exactly an integer (in case you assume you'll get an integer, perhaps because you check for equality with an integer at some point).

Hope I've got that all right!

Ooh. Pretty big script! Let me rephrase that. really big script!

Even better than that huge script: this block!

(() ^ ())

The ^: To the power of.

I need this in my current project, and so far, the only way I can do it is by making a different variable just so my value can go up just the right amount.

Also, rename and delete functions for variables? I know delete was in 1.4, why was it deleted?

The delete button wasn't deleted in Scratch 2.0; it's still there. Right click a variable in the block palette, and you can delete it and rename it.

About the ^ power, I'd just like to point out a workaround:

([10 ^ v] of ((power) * ([log v] of (base))))

Showing,

ErnieParke

I support, because sometimes I have to use it.

Or, if we could get custom reporter blocks, we could just make one of those.