I have this ATM Simulation Project and it has some massive problems. I have it so you can enter a pin code but whenever the keys on the keypad are pressed it doesn't change what it should. That probably didn't make sense. Click here to go to my project and find what I'm going on about so you can please help me http://scratch.mit.edu/projects/12112966/

OK. Use this script:

when this sprite clicked
broadcast [what ever number the sprite is]

Then set a variable to that number. I hope this helps!

I would use:

When this sprite clicked:
change pin#s by 1,
if pin#s = 1,
set # Pin 1(or whatever you have the variables you can change) to (number that is on the button)
if pin#s = 2,
set # Pin 2(or whatever you have the variables you can change) to (number that is on the button)
if pin#s = 3,
set # Pin 3(or whatever you have the variables you can change) to (number that is on the button)


Sorry I didn't use Scratchblocks, I mess them up.


Hope this helps

I replied on your other topic where you asked me how I'd do it. I've given an example there which may help?